Bright, energy efficient and adds to rider safety! ATON additional headlights increase the vehicle outline and provide a considerably expanded field of view at night.
The facts:

• 100% uniform illumination thanks to the stretched, three-dimensional diffuser lens.
• Pure white light.
• Very long life (about 100,000 hours).
• No self-glare.
• Sharp delimitation upwards and downwards, so no dazzling of the oncoming traffic and excellent illumination in fog, rain etc. (no stray light).
• Extremely robust through a closed and sealed construction.
• Protected according to IP67.
• Only 66mm diameter (without mountings).
• Integrated ballast, so no additional installation effort or space requirement for ballast.
• E approved.
• Special bracket set and cables for every vehicle type.
• Complete headlight set (right & left) consisting of two ATON LED additional headlights, mounting kit and electrical installation kit.
• 5 year guarantee.

.
Download fitment instructions
read less...

Highly luminous, low energy absorption and more active safety! ATON additional headlights increase the vehicle outline and provide a considerably expanded field of view at night.
The facts:

• 100% uniform illumination thanks to the stretched, three-dimensional diffuser lens.
• Pure white daylight.
• Very long life (about 100.000 hours).
• No self-glare.
• Very good additional illumination for headlight.
• Extremely robust through a closed and sealed construction.
• Protected according to the IP67.
• Integrated ballast unit = no additional mounting.
• E approved.
• Special bracket set and cables for every vehicle type.
• Headlight set (right & left), low weight bracket set and electrical installation kit.

Download fitment instructions
read less...

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.
The all new Cree High-Intensity 10 watt LED's are focused through their TriOptic Lens System to give you three unique beam patterns in one kit.
Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.
Denali's DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.
DR1 Kit Contents

• 2 x LED light pods
• 2x Spot lenses (installed)
• 2x E mark approved elliptical flood lenses (Included)
• HotSwap single intensitiy witing harness
• DrySeal waterproof iluminated switch
• 7/8" inch handlebar switch mount
• 1-inch handlebar switch mount
• 2x Hinge mounts with M8 stainless steel hardware
• 4x Zip ties and 1x Adhesive mounting square.

For the DataDim controller please see RGA11001 .

Download more information and specifications
read less...

The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don't be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.

DENALI's innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller - RGA11001 - that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

D2 kit specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 525 Feet
• Beam Width (Spot): 75 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep (each)
• Pod Weight: 0.6 lbs (each)
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lenses

D2 kit contents:

• 2 x LED light pods
• 2x Spot lenses (installed)
• 2x E mark approved elliptical flood lenses (Included)
• HotSwap single intensitiy witing harness
• DrySeal waterproof iluminated switch
• 7/8" inch handlebar switch mount
• 1-inch handlebar switch mount
• 2x Hinge mounts with M8 stainless steel hardware
• 4x Zip ties and 1x Adhesive mounting square.

Download more information and specifications
read less...

Constructed from black anodized billet aluminum for strength and durability, this kit provides a 1.75" (45mm) offset for your lights from any M5, M6 or M8 bolt point on your motorcycle.
Typical mounting points include fairings, triple clamps and fenders, and can be mounted horizontally or vertically. The bracket will accept any M8 bolt, making this the most universal offset mounting solution that R&G know of
Kit includes:

• 2 CNC machined billet aluminum brackets (black anodized)
• 4 spacers
• 4 steel bushings
• Mounting hardware
• Mounting instructions

Lights (pictured) are not included ! (but are available separately).
read less...

Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile.
The all new Cree High-Intensity 10 watt LED's are focused through their TriOptic Lens System to give you three unique beam patterns in one kit.
Equipped with DataDim Technology and a modular HotSwap wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.
Denali's DrySeal submersible waterproof construction and Impact PC Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.
DR1 Kit Contents

• 2 x LED light pods
• 2x Spot lenses (installed)
• 2x E mark approved elliptical flood lenses (Included)
• HotSwap single intensitiy witing harness
• DrySeal waterproof iluminated switch
• 7/8" inch handlebar switch mount
• 1-inch handlebar switch mount
• 2x Hinge mounts with M8 stainless steel hardware
• 4x Zip ties and 1x Adhesive mounting square.

For the DataDim controller please see RGA11001 .

Download more information and specifications
read less...

The DM was designed to concentrate all 2190 lumens into a small optic to create a super compact light that is incredibly bright to look at. These lights are the ideal solution for daytime visibility, but will still outshine your typical high beam. The installed spot beam lenses create a beam that reaches a distance of 395 feet. The included flood lenses carry an official E-Mark certification and throw a beam of light 150 feet wide.

DENALI's innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller - RGA11001 - that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.

DM kit specs:

• LED's: (2x) 10 Watt Cree XPL HI
• Power Draw: 1.6 Amps
• Beam Distance (Spot): 395 Feet
• Beam Width (Spot): 55 Feet
• Raw Lumens: 2190
• Intensity: Single Intensity Harness
• DataDim™ Compatible: Yes
• Operating Voltage: 12 VDC
• Pod Size: 2.2” Round x 2.4” Deep (each)
• Pod Weight: 0.6 lbs (each)
• IP67 Waterproof & Submersible
• E Mark Approved Flood Lenses

DM kit contents:

• 2 x LED light pods
• 2x Spot lenses (installed)
• 2x E mark approved elliptical flood lenses (Included)
• HotSwap single intensitiy witing harness
• DrySeal waterproof iluminated switch
• 7/8" inch handlebar switch mount
• 1-inch handlebar switch mount
• 2x Hinge mounts with M8 stainless steel hardware
• 4x Zip ties and 1x Adhesive mounting square.

Download more information and specifications
read less...

LED.  Black.  ECE test mark.  EVO fog lights/cable harness/power switch.  In pairs.  EVO fog lights with broad dispersion create more safety and better visibility in bad weather conditions and increase your visibility to on-coming traffic.  SW-Motech has chosen a strong partner in the automotive industry to create these high quality lights.  

EVO lights represent outstanding design, high-quality standards and reliable water and dust protection (IP69).  The long life LED technology guarantees trouble-free and maintenance free operation for years.  - Trouble-free and maintenance-free operation through wear-free LED, consuming significantly less power - Input voltage:  12 V DC, LED:  12 W (per light) - Luminous flux:  1,050 LM - ECE test mark:  ECE R19 F3 - Broad dispersion - Outer diameter:  7.1 cm - Water and dust proof (IP69) - Connects directly to the motorcycle, no changes to the motorcycle electrical system necessary - Weatherproof, illuminated green handlebar switch for easy control - Mounting points on all four sides of the light body - Universal light clamps available for crash bar mounting (Ø 22, 26, 27, 28 mm) or on bike-specific light mounts for frame mounting (sold separately, see ACA04115 ) - Material:  aluminium housing, powder coated - Colour:  black Included:  - 2 EVO fog lights - Wiring harness with fuse - Switch Note:  Due to their angled reflector, these need to be mounted with SW-Motech logo on top.  

Download fitment instructions   
read less...

LED.  Black.  ECE test mark.  EVO high beam lights/cable harness/power switch.  In pairs.  EVO high beam lights are ideal for riding long distances in on/off road conditions where maximum beam distance is desired to increase visibility and safety.  SW-Motech has chosen a strong partner in the automotive industry to create these high quality lights.  

EVO lights represent outstanding design, high-quality standards and reliable water and dust protection (IP69).  The long life LED technology guarantees trouble-free and maintenance free operation for years.  - Trouble-free and maintenance-free operation through wear-free LED, consuming significantly less power - Input voltage:  12 V DC, LED:  12 W (per light) - Luminous flux:  800 LM - ECE test mark:  ECE R113 Rev.2 - Narrow dispersion, long distance - Outer diameter:  7.1 cm - Water and dust proof (IP69) - Connects directly to the motorcycle, no changes TO the motorcycle electrical system necessary - Weatherproof, illuminated blue handlebar switch for easy control - Mounting points on all four sides - Universal light clamps for crash bar mounting (Ø 22, 26, 27, 28 mm) or on bike-specific light mounts for frame mounting (sold separately, please see ACA04115 ) - Material:  aluminium housing, powder coated - Colour:  black Included:  - 2 EVO high beams - Cable harness with fuse - Switch - Mounting material - Mounting instructions Note:  Due to their angled reflector, these need to be mounted with SW-Motech logo on top.  
read less...

Pair of universal, certified anti-fog projectors, with black painted aluminium housing and LED technology that guarantees low energy consumption, making the S322 suitable for mounting on motorcycles with small engines, without the risk of draining the battery.  Easily attached to all engine-guards with a tubular diameter of between 21mm and 25mm.  

Supplied with fuse and cables for direct connection to the battery and with a waterproof switch to mount on the handlebar.  Also supplied with a third cable to connect to the motorcycle ignition lock.
  
read less...