» Login | Register



The Shop


«  1  2  3  »  


Touratech stainless steel engine Crashbar extension black | ACA51630

 ACA51630 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016). See Also Fits...

view larger image Larger Image
Please note; this item can be fitted in conjunction with both Touratech's engine protection bar ACA51600 and the original BMW engine protection bars.
The Touratech crash bar extension protects the delicate radiator, the fairing and even the tank of the new water cooled boxer!
Even though BMW has fitted the radiator as closely as possible to the R1200GS, its bottom corners still protrude quite a lot. A bad drop can be all it takes to put paid to a trip - and you can expect a large bill for repairs.
The Touratech crash bar extension will also help put an end to annoying scratches on the fairing!
Please note, there is a bespoke pair of bags to match these bars - please see LUA58160 .
Made exclusively of strong, electropolished stainless steel, the extension will not rust. Even deep scratches are less frightening, and can simply be ground off. We have taken up the sporty lines of the R1200GS and positioned the bars as closely as possible to the vehicle. The crash bar extension looks as if it were a part of the motorbike.
  • forces triggered by a crash or the motorbike falling over are absorbed and diverted to the specially intended points without causing any major damage
  • the generously dimensioned cross-sections protect the rider and motorbike even in a head-on collision
  • stable, multi-position attachment with high-tensile clamping to the engine crash bar and bolting at the front
  • lends the R1200GS an aura of ADVENTURE
  • for all BMW R1200GS models from 2013
£232.49 INC VAT
£193.74 EX VAT

Quantity



+ Add to Wish List

Touratech stainless steel crashbars | ACA51600

Fits these models:

fitsR1200GS LC (09/2012 -08/2016)

fits R1200GS LC (09/2016 - 08/2018)

 ACA51600 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016), R1200GS LC (09/2016 - 08/2018) Show All...

view larger image Larger Image
No matter which way the GS should fall, the Touratech crash bar is right where it is needed. The most comprehensive all-round protection there has ever been for a boxer engine!
A "cage" of 25mm diameter stainless steel tubes with a 2mm wall thickness completely encloses the cylinders. Any forces that occur are safely deflected and distributed to gently break them down. Numerous assembly points, intended bending points and the central strut guarantee safe protection not only of the cylinders, but also of the frame and engine of your GS.
Despite the impressive tube diameter, the crash bar is positioned as closely as possible to the vehicle and has no effect at all on the leaning angles or ground clearance.
It blends perfectly with the looks of the GS, completing the overall appearance - and is simply a part of it all!
Made exclusively of strong, electropolished stainless steel, the crash bar will not rust.
Even deep scratches are less frightening, and can simply be ground off.
The assembly points are perfectly matched to the GS!
Needless to say, everything that is needed to fit it, is included.

The perfect additions to the crash bar are Touratech's crash bar extension ACA51610 and cylinder protection ENA51300 .

In short:
  • complete protection for the cylinders, including to the back and top
  • safe deflection of any occurring forces without damaging the frame or engine
  • no restrictions to leaning angle freedom
  • made of 18/2 stainless steel
  • Made in Germany

£260.50 INC VAT
£217.08 EX VAT

Quantity



+ Add to Wish List

Touratech stainless steel engine Crashbar extension | ACA51610

 ACA51610 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016). See Also Fits...

view larger image Larger Image
Please note;  this item can be fitted in conjunction with both Touratech's engine protection bar ACA51600 and the original BMW engine protection bars.
The Touratech extension bar protects the delicate radiator, the fairing and even the tank of the new water cooled boxer!
Even though BMW has fitted the radiator as closely as possible to the R1200GS, its bottom corners still protrude quite a lot.  
£232.49 INC VAT
£193.74 EX VAT

Quantity



+ Add to Wish List

Touratech stainless steel extension for original BMW upper Crashbar | ACA01045

Fits these models:

fitsR1200GS Adv LC (09/2013 - 08/2018)

 ACA01045 also used as:

Close X

Fits R1200GS Adv LC (09/2013 - 08/2018) Show All...

view larger image Larger Image
This is an extension for the original BMW Adventure upper crash bars.
Please note: Cannot be combined with Stainless steel reinforcing strut for original BMW engine crash bar, R1200GS LC 2013 and R1200GS Adventure LC 2014
Even better protection for adventure seekers and their Adventure GS.
The stainless steel Touratech crash bar extension can provide help where the original R1200GS Adventure crash bar no longer suffices.
And this can happen quicker than one may think.
For example, when the motorbike tips beyond the crash bar and parts of the fairing or even the sensitive aluminium tank are affected. This cannot only become expensive but put an abrupt end to a lovely tour as a worst scenario.
The crash bar extension is made of robust, electropolished stainless steel is easy to clean and rust-proof. The intelligent four-point screw connection distributes crash or impact forces over the frame, resulting in less damage.
  • Even deep scratches can be polished up.
  • made of electropolished stainless steel and is therefore rust-proof
  • unrestricted freedom for knees and legs
  • tried, tested and proven in tough daily travel
  • own production and "Made in Germany"
£232.49 INC VAT
£193.74 EX VAT

Quantity



+ Add to Wish List

Touratech stainless steel reinforcement strut for OEM crashbars | ACA55169

Fits these models:

fitsR1200GS LC (09/2016 - 08/2018)

fits R1200GS Adv LC (09/2013 - 08/2018)

 ACA55169 also used as:

Close X

Fits R1200GS LC (09/2016 - 08/2018), R1200GS Adv LC (09/2013 - 08/2018) Show All...

view larger image Larger Image
PLEASE NOTE:  This is for 2017 on models.
The BMW engine crash bar on the water-cooled R1200GS isn't a proper crash bar until you fit the Touratech reinforcing strut!  The additional supporting point is the key to providing maximum safety.In terms of design and appearance, it perfectly matches the BMW engine crash bar on the GS since it is the same diameter and has an electropolished surface.  
£121.29 INC VAT
£101.08 EX VAT

Quantity



+ Add to Wish List

Touratech stainless steel engine Crashbar extension | ACA51618

 ACA51618 also used as:

Close X

Fits R1200GS LC (09/2016 - 08/2018). See Also Fits...

view larger image Larger Image
Please note;  this item can be fitted in conjunction with both Touratech's engine protection bar ACA51600 and the original BMW engine protection bars.
The Touratech extension bar protects the delicate radiator, the fairing and even the tank of the new water cooled boxer!
Even though BMW has fitted the radiator as closely as possible to the R1200GS, its bottom corners still protrude quite a lot.  
£232.49 INC VAT
£193.74 EX VAT

Quantity



+ Add to Wish List

Touratech engine guard Expedition | FRA51350

Fits these models:

fitsR1200GS LC (09/2012 -08/2016)

fits R1200GS Adv LC (09/2013 - 08/2018)

 FRA51350 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016), R1200GS Adv LC (09/2013 - 08/2018) Show All...

view larger image Larger Image
In creating the BMW R1200GS, the developers at BMW have produced a motorbike that practically invites you take it on an off-road excursion.  Touratech's development team were able to make a number of further improvements to its positive off-road characteristics.  This engine guard is an absolute revolution!
Touratech have attached great importance to its robustness and functionality.
Serious damage, such as holes in the engine block, can be effectively prevented by fitting the large Touratech engine guard.  
£232.49 INC VAT
£193.74 EX VAT

Quantity



+ Add to Wish List

Touratech engine guard extension Expedition | FRA51450

Fits these models:

fitsR1200GS LC (09/2012 -08/2016)

fits R1200GS Adv LC (09/2013 - 08/2018)

 FRA51450 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016), R1200GS Adv LC (09/2013 - 08/2018) Show All...

view larger image Larger Image
Touratech have developed an engine guard extension to go with their *Expedition* engine guard, FRA51350 .  The design is the same, technically and optically.  The *Expedition* extension closes the gap between the engine guard and the rear wheel.
An unbeatable advantage, especially off-road!  
£46.59 INC VAT
£38.83 EX VAT

Quantity



+ Add to Wish List

Touratech cylinder head protector set - natural aluminium | ENA51300

 ENA51300 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016). See Also Fits...

view larger image Larger Image
Easy to fit + lightweight + high level of protection.
Touratech accepted these challenges, and the result is a cylinder protector that meets all these criteria!
Made of 3 mm aluminium and with specific attachment points, the Touratech cylinder protector can cope with stationary "drops" as well as tougher impacts. Now there's an end to scratches - and even worse damage - to valve covers.
Tested in Madagascar as well as various other locations, the protector has more than proved its abilities. A "must" for any boxer engine with wide cylinders.
  • can be mounted along with the Touratech stainless steel crash bar ACA51600
  • made of 3 mm aluminium
  • easily and quickly fitted
£121.29 INC VAT
£101.08 EX VAT

Quantity



+ Add to Wish List

Touratech cylinder head protector set - black | ENA51310

 ENA51310 also used as:

Close X

Fits R1200GS LC (09/2012 -08/2016). See Also Fits...

view larger image Larger Image
Easy to fit + lightweight + high level of protection.
Touratech accepted these challenges, and the result is a cylinder protector that meets all these criteria!
Made of 3 mm aluminium and with specific attachment points, the Touratech cylinder protector can cope with stationary "drops" as well as tougher impacts. Now there's an end to scratches - and even worse damage - to valve covers.
Tested in Madagascar as well as various other locations, the protector has more than proved its abilities. A "must" for any boxer engine with wide cylinders.
  • can be mounted along with the Touratech stainless steel crash bar ACA51600
  • made of 3 mm black anodised aluminium
  • easily and quickly fitted
£121.29 INC VAT
£101.08 EX VAT

Quantity



+ Add to Wish List
«  1  2  3  »  

Shopping Basket
You have no items in your basketshop for BMW motorcycle spares online now
» New BMW bike parts
» Used BMW bike parts
» Accessories
Show approximate prices in:
Call Us

New & Used BMW Parts
01484 353600
International: +44 1484 353600
Fax: +44 1484 353604
Sales lines open
Mon - Fri: 9:00am - 12:30pm & 1:30pm - 5:30pm
(excluding bank holidays)
Need a BMW part number?
we are open
Search the RealOEM online parts fiche (opens in new window) and use the part number to search this site.
Read more about finding parts
Translate