Brake caliper repair kit
Rear, Brembo caliper, for bikes built before 09/1980, 50mm bolts
SKU
BRA37234-4
Associated BMW part
34211237234
Limited stock, more on the way
£17.40
£14.50
You might also need
Check parts to add to the basket or
TOA00011-1
Vacuum pump brake and clutch bleed set
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£119.00
£99.17
OIA11030-1
Brake cleaner spray
500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£5.95
£4.96
OIA11015B-1
Brake fluid
Dot 4, 1 litre
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£12.90
£10.75
OIA11069-1
Brake assembly paste
5.5g
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£1.99
£1.66
TOA37316-1
Brake and clutch bleeding kit
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£7.00
£5.83
OIA11015D-1
Brake fluid
Dot 4, 500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£7.96
£6.63
This kit is for Brembo calipers with 38mm diameter pistons (see model list), and contains 2 x oil seals, 2 x dust seals, 1 x caliper half O ring, 2 x caliper half bolts, (50mm long please measure before ordering. If bolt is 40mm, please use BRA10493) and a sachet of brake assembly paste.
Note; for models listed produced before 09/1980, this kit applies to the rear brake caliper only.
For an upgrade Viton seal kit, please see BRA10310.
This kit contains the 2 oil seals & 2 dust seals & the caliper half O-ring & the caliper through bolts. These are for Brembo P8 calipers, which have 38mm diameter pistons, and are also used on some Laverdas, Moto Guzzis and MZs. For pistons for this caliper see BRA37235 or BRA37237
Note; for models listed produced before 09/1980, this kit applies to the rear brake caliper only.
For an upgrade Viton seal kit, please see BRA10310.
This kit contains the 2 oil seals & 2 dust seals & the caliper half O-ring & the caliper through bolts. These are for Brembo P8 calipers, which have 38mm diameter pistons, and are also used on some Laverdas, Moto Guzzis and MZs. For pistons for this caliper see BRA37235 or BRA37237
| Weight | 0.135000 |
|---|---|
| Position on motorcycle | Rear |
| Universal Part | No |
| Condition | New |
| Associated BMW part | 34 21 1 237 234 |
Customer Questions