Carburettor

Right, PHM 38BD

SKU

FUA62398-1

Associated BMW part

13111262398

Good stock

£339.43 £282.86

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Description

Only the R90S was fitted with these carburettors by the factory, but they are also commonly used to replace Bing CV carbs.

These carburettors are directly mounted to the longer inlet stub of the R90S cylinder head, in conjunction with the heat insulating bush FUA60885. Longer inlet stubs are also available separately, to allow fitting of these carburettors to R75, R80, R90/6 and R100 models - see ENA00200 and ENA00200A, and FUA59819.

Fitting these carbs in this way allows you to keep the original airbox if you wish;

You will need two of the Dellorto carb to inlet duct rubber sleeves FUA59820.
You will need to use the inlet ducts FUA58059A and FUA58059B if your bike was produced before 09/1980, and has the two piece clamshell airbox with the round air filter.
If your bike uses the flat air filter fitted from 09/1980 onwards, you will need two of the left hand pre 09/1980 ducts FUA58059A.

We also stock 40mm Dellortos; please see FUA62399A and FUA62399B.

Part specifications