Front brake caliper repair kit
From 11/2001, Evo Brembo
SKU
BRA38257-5
Associated BMW part
34112338257
Good stock
£78.00
£65.00
You might also need
Check parts to add to the basket or
TOA00011-1
Vacuum pump brake and clutch bleed set
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£119.00
£99.17
TOA37316-1
Brake and clutch bleeding kit
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£7.00
£5.83
OIA11015B-1
Brake fluid
Dot 4, 1 litre
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£12.90
£10.75
OIA11015D-1
Brake fluid
Dot 4, 500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£7.96
£6.63
OIA11030-1
Brake cleaner spray
500ml
Universal part
Universal parts can be fitted to various motorcycles so we can't guarantee this will fit yours, some modifications or additional parts may be required
£5.95
£4.96
SSA60850-6
These are for the Brembo calipers which have BMW written on the outside face of the caliper and Brembo on the inside face.
With anti squeal insert. Silicon oil is provided in the kit for fitting the pistons to the calipers and should be used in order to avoid damage during assembly.
Please note, we do not recommend splitting these calipers, as the caliper halves are prone to distortion when doing so, which makes them leak on re-assembly. This is why a caliper half o ring is not provided in this kit.
However, if you absolutely MUST split these calipers (which you do at your own risk), the standard caliper half o ring BRA10494 is the one you need to reassemble the two halves.
Please see BRA60850 for the caliper pad pin kit, and SSA60850 for a stainless steel replacement pad pin.
Please note, we do not recommend splitting these calipers, as the caliper halves are prone to distortion when doing so, which makes them leak on re-assembly. This is why a caliper half o ring is not provided in this kit.
However, if you absolutely MUST split these calipers (which you do at your own risk), the standard caliper half o ring BRA10494 is the one you need to reassemble the two halves.
Please see BRA60850 for the caliper pad pin kit, and SSA60850 for a stainless steel replacement pad pin.
| Weight | 0.186000 |
|---|---|
| Position on motorcycle | Front |
| Universal Part | No |
| Condition | New |
| Associated BMW part | 34 11 2 338 257 |
Customer Questions