» Login | Register



The Shop



Touratech cylinder head protector set - natural aluminium | ENA51300

 ENA51300 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
Easy to fit + lightweight + high level of protection.
Touratech accepted these challenges, and the result is a cylinder protector that meets all these criteria!
Made of 3 mm aluminium and with specific attachment points, the Touratech cylinder protector can cope with stationary "drops" as well as tougher impacts. Now there's an end to scratches - and even worse damage - to valve covers.
Tested in Madagascar as well as various other locations, the protector has more than proved its abilities. A "must" for any boxer engine with wide cylinders.
  • can be mounted along with the Touratech stainless steel crash bar ACA51600
  • made of 3 mm aluminium
  • easily and quickly fitted
£121.29 INC VAT
£101.08 EX VAT

Quantity



+ Add to Wish List

Touratech cylinder head protector set - black | ENA51310

 ENA51310 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
Easy to fit + lightweight + high level of protection.
Touratech accepted these challenges, and the result is a cylinder protector that meets all these criteria!
Made of 3 mm aluminium and with specific attachment points, the Touratech cylinder protector can cope with stationary "drops" as well as tougher impacts. Now there's an end to scratches - and even worse damage - to valve covers.
Tested in Madagascar as well as various other locations, the protector has more than proved its abilities. A "must" for any boxer engine with wide cylinders.
  • can be mounted along with the Touratech stainless steel crash bar ACA51600
  • made of 3 mm black anodised aluminium
  • easily and quickly fitted
£121.29 INC VAT
£101.08 EX VAT

Quantity



+ Add to Wish List

Touratech bevel box guard | TRA55000

 TRA55000 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
It's a sad fact that the exposed rear axle housing is invariably adversely affected when riding off-road, and often so badly damaged that it is impossible to continue travelling.
Touratech have developed the perfect protection to prevent scratches and stone damage, as well as more serious damage, when riding over scree or other obstacles.
It is made of impact-resistant, fibreglass-reinforced plastic, and wraps itself around the cardan housing like a protective hand. Needless to say, it allows for BMW's proposed cooling air supply, and leaves a corresponding opening on the underside at the front.
And furthermore, this cardan guard will also give your R1200GS an unmistakeable, individual look!
The guard is attached by an easy-to-fit attachment kit made of anodised aluminium.
  • made of fibreglass-reinforced PU
  • easy to fit
  • low weight
  • fascinating looks
  • repellent effect even with branches and loose stones
£139.97 INC VAT
£116.64 EX VAT

Quantity



+ Add to Wish List

Touratech bevel box pivot crash bung | TRA55050

 TRA55050 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
A little item that prevents big damage! Sadly, the cardan housing of your R1200GS can suffer serious scratching and other damage even if it just falls over when stationary. If such a mishap occurs off-road, scree and dirt can even damage the rear axle seal, and in the worst case leaking oil can prevent you from travelling further.
Fitting this highly resilient, beautifully shaped crash bung in time can eliminate this danger - and prevent the expensive consequences!
  • easy to fit and highly durable
  • material mix of high-strength aluminium and resilient PE
  • beautifully shaped, sporty design with a textured surface
  • slightly angled for maximum leaning angle freedom on the road and optimum free movement off-road
  • easy to remove when required
£46.59 INC VAT
£38.83 EX VAT

Quantity



+ Add to Wish List

Touratech brake caliper plastic cover set front | BRA51720

 BRA51720 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
Just a few years ago, an elegant cover over the calipers was included in the standard fittings on many motorbikes when they left the factory. Unfortunately, though, all searches for this protective and attractive cover for the R1200GS have proved futile. And yet it not only hides the often ugly individual components of the brake, but also stops the aggressive brake dust from settling on the rims, makes sure that rain and salt water don't delay the braking process, and prevents pebbles and dirt from affecting the performance of the brake pads.
Touratech covers are made of PU, come as an easy-to-fit set, and make sure that the front brake system of your GS looks good and works safely!
  • made of heat-resistant, extremely stable plastic
  • easy to remove for maintenance work
  • strong metal clip for safe attachment
  • precision made
  • reduces the amount of brake dust on the delicate rims
£46.59 INC VAT
£38.83 EX VAT

Quantity



+ Add to Wish List

Touratech rear brake fluid reservoir guard | FRA50300

 FRA50300 also used as:

Close X

Fits R1200RS LC (09/2014 - 08/2018). See Also Fits...

view larger image Larger Image
On the BMW the brake fluid reservoir is all too easily accessible, putting it at risk of damage or tampering. Made from laser-cut aluminium, Touratech's brake fluid reservoir guard effectively prevents damage and undesired access to the reservoir lid, yet you can still easily see the fluid level. The guard simply bolts onto the existing mounting point. £27.92 INC VAT
£23.27 EX VAT

Quantity



+ Add to Wish List

Shopping Basket
You have no items in your basketshop for BMW motorcycle spares online now
» New BMW bike parts
» Used BMW bike parts
» Accessories
Show approximate prices in:
Call Us

New & Used BMW Parts
01484 353600
International: +44 1484 353600
Fax: +44 1484 353604
Sales lines open
Mon - Fri: 9:00am - 12:30pm & 1:30pm - 5:30pm
(excluding bank holidays)
Need a BMW part number?
we are open
Search the RealOEM online parts fiche (opens in new window) and use the part number to search this site.
Read more about finding parts
Translate